FABRYKA AUTOMATÓW TOKARSKICH (FAT)
281 53-234 WROCŁAW
Phone: +48 (71) 36 09 100
Fax: +48 (71) 36 09 121
The headstock, made of one mono-block casting, is located on hardened and ground bed guide ways. Hand scraped contact surfaces ensure the best fit and durable alignment. The high precision spindle bearings guarantee an excellent stability and accuracy when machining parts.
The standard 125 mm diameter tailstock quill diameter is located in a special extended body which increases the machining range whilst keeping high rigidity. The quill diameter can be increased up to 140 mm or 160 mm for heavy duty machining. The bearing system for the quill is prepared for mounting the dead centre MT5 or MT6 and is available as an additional option.
|Swing over bed||800- 950- 1100/1200||mm|
|Swing over saddle||500- 630- 790/830||mm|
|Distance between centres (other lengths for request)||2000 - 3000-... - 5000 - 6000 - 8000 - 10000||mm|
|Max. workpiece weigth between centres without steady rests (option)||4000 (8800)||kg|
|Spindle speed range||4- 1800||rpm|
|Main drive power (option)||33 (56)||kW|