281 53-234 WROCŁAW
Phone: +48 600 429 321
The COMBI has a notching capacity of 6mm, a blade length of 220mm and has variable angle between 30 and 140 degrees. Several adjustable stops come standard with a second set of blades.
A rectangular notching unit can be very quickly attached at the back of the machine. 2 adjustments knobs can adjust pressure and speed of the back station.
Bending depth and speed
Utilize the COMBI for bending with the gooseneck punch and multi-V bottom die. The bending depth can be adjusted with an adjustable knob on top of the machine. A mechanical display shows the depth. Bending speed can be adjusted by increasing or decreasing the oil flow to the cylinder.
You can also replace the bending unit with a punch unit to punch round holes, squares, rectangular or oblong shapes.