FABRYKA AUTOMATÓW TOKARSKICH (FAT)
281 53-234 WROCŁAW
Phone: +48 (71) 36 09 100
Fax: +48 (71) 36 09 121
The great advantage to the user of this lathe is the possibility of employing the highly developed techniques without any special knowledge of programming. Reduced machining times, the highest and uniform precision of all parts in the batch as well as taking away from the operator his routine work demonstrate the new level of production efficiency.
Operating in the conventional manner
The TUR SC lathe is equipped with control elements traditionally used on modern manual centre lathe, such as hand wheels and the digital readout system. Therefore the machine offers to its operator the possibility to operate it in the conventional manner.
The sequence of motions can involve a single element of machining, a fixed cycle or a complete program. The first steps are easy to master and you can then gradually increase the level of complexity. Right through to user-friendly Easy-step programming and ready cycles.
High torque at low speeds
The spindle speed is infinitely adjustable from the minimum until maximum speed. CCS is programmable. To ensure a high torque at low speeds, the machine is equipped with a 2 speed range gearbox which is automatic programmable as standard.
The machine is as standard equipped with manual quick change tool holder (Multifi x C). Steady rest and chip conveyor are optionally available.
|**TUR SC 560/630/710**||**TUR SC 800/930/1110**|
|Swing over bed||560- 630- 710||800- 950- 1100||mm|
|Swing over saddle||300- 370- 450||500- 630- 790||mm|
|Distance between centres||1000 - 2000 - 3000 - 4000||1000- 2000- 3000- 4000- 5000- 6000||mm|
|Max. weight of workpiece||2000||4000||kg|
|Spindle speed range||0- 1700||0- 1700||rpm|
|Main drive power||15||22||kW|