Haco.com
HACO France

ZI rue Laënnec
59930 La Chapelle d'Armentières
France
Téléphone : +33 (0)3 20 10 30 40
Fax:  +33 (0)3 20 10 30 49

Contactez-nous !

Multi-Flex 6.250 mm up to 30.250 mm 

The Multi-Flex is an ideal machine for finishing heavy aluminium & steel profiles nested over a full bar length. Due to the large profile section we are also albe to finisch frames used for mass transportation. The Multi-Flex is a Gantry machine with a 5-axis milling motor of 18 KW, 25 KW or 39,5 KW with a tool turret of 36 places.

At this large profile section,  width 1.300 mm x heigth 650 mm, we are albe to measure, drill, tap, mill and saw. The result of the measure probe will be automatically compensated in the NC-Program. Clamps (8 up to 16) are placed with the column of the machine or they are motorized by themselves.


Specifications 5-Axis Gantry 

22577original-multi-10-2.jpg

Work Piece Length

6.250 up to 30.250 mm

246.1 " up to 1,190.9 "

Work Piece Width

1.300 mm

51.18 "

Work Piece Height

650 mm

25.59 "

Rapid X

60 m/min

39.4 "/s

Rapid Y

60 m/min

39.4 "/s

Rapid Z

60 m/min

39.4 "/s

Machining center Multi-Flex 9250 & 30 

The Multi-Flex is an ideal machine for finishing heavy aluminium & steel profiles nested over a full bar length. Due to the large profile section we are also albe to finisch frames used for mass transportation. The Multi-Flex is a Gantry machine with a 5-axis milling motor of 18 KW or 25 KW with a tool turret of 36 places.

At this large profile section,  width 1.300 mm x heigth 650 mm, we are albe to measure, drill, tap, mill and saw. The result of the measure probe will be automatically compensated in the NC-Program. Clamps (8 up to 16) are placed with the column of the machine or they are motorized by themselves.

  • profileflex-motor-positions-wd2-4-1-1.jpg
  • profileflex-motor-positions-4-1-1.jpg

5-Axis water cooled spindle (18 KW)

Important machine features:

  • Ideal machine for finishing frames used for industrial panels
  • Ideal machine for finishing panels used for carbodys of mass transportation
  • Profile Section:  width 1.300 mm x heigth 650 mm 
  • Nesting profiles - Cleat Cut
  • Measure, drill, tap, mill, saw

Used for:

  • Aluminium & coiled steel profiles
  • Aluminium & coiled steel frames

Specifications:

  • MF 9250 = Maximum work piece dimensions which can be processed = 9.250 x 1.300 x 650 mm
  • MF 30 = Maximum work piece dimensions which can be processed = 30.250 x 1.300 x 650 mm
  • We construct any length of these models on demand.
  • Rapid X = 60 m/min, rapid Y = 60 m/min, rapid Z = 60 m/min

Working area and safety precautions:

  • All models are standard delivered with safety fences on the left, right and back side of the machine.
    The front side is protected with a CE certified led safety curtain to protect the working area.
  • As an option all our models can be equipped as 2 working zones with CE safety scanner. The great advantage of scanners is that there are no barriers in the middle of the machine, which makes loading and unloading a lot easier when switching from 2 zones to 1 large working area.

5-axis spindle - 18 KW:

  • 15 kW (S1), 18 kW (S6) - 24.000 RPM – HSK-F63 tool holders.
  • The spindle is water cooled with an airco system.
  • CNC rotation of the spindle (A-axis) between -115° and +115° - rapid = 50°/sec
  • CNC rotation of the fork (C-axis) between -220° and +220° - rapid = 50°/sec
  • Maximum tool length 200 mm - longer tools possible with manual tool change
  • Maximum tool diameter is 520 mm

5-axis spindle - 25 KW:

  • 20 kW (S1), 25 kW (S6) - 22.000 RPM – HSK-A63 tool holders.
  • The spindle is water cooled with an airco system.
  • CNC rotation of the spindle (A-axis) between -110° and +110° - rapid = 300°/sec
  • CNC rotation of the fork (C-axis) between -225° and +225° - rapid = 300°/sec
  • Maximum tool length 220 mm - longer tools possible with manual tool change
  • Maximum tool diameter is 700 mm
mub04overview-3-3.jpg
  • 2-axis-head-with-angular-tool-holder-1-exit-90-er25-1-10-2-1.jpg
  • 2-axis-head-with-saw-2-2-1.jpg
  • 2-axis-head-with-standard-tool-without-arrows-2-2-1.jpg
  • 2-axis-head-with-standard-tool-2-2-1.jpg

Spindle power

18 KW (S6)

24.5 Hp

CNC rotation of the spindle (A-axis)

50 °/sec

50 °/sec

CNC rotation of the fork (C-axis)

50 °/sec

50 °/sec

Maximum speed

24.000 rpm

24.000 rpm

Tool holder type

HSK-F63

HSK-F63

Tool turret:

  • Linear tool turret of 36 places
  • Angular tools are stored in the standard turret.

5-Axis water cooled spindle (25 KW or 39,5 KW)

  • 5axisturret-5-1.jpg
mub11overview-1.jpg

Explanation of the flow proces:

  • Select the program of the full bar length manual of with scanning of a barcode.
  • The clamps will be automatic set a the correct position.
  • Load the full bar length on the machines.
  • Start the program, the machine will drill, mill tap the pieces.
  • During this fabrication the NC of the machine can:
    • Print new lables to identify the new parts when we have a lable printer available.
    • Select the next program of the full bar length manual of with scanning of a barcode to check the profile and type of clamps needed. We are able to prepare these matters during proces the current part.
  • When mitre cut is requested the machine will cut first all -45° saw cuts and than all +45° saw cuts, when we only need a straight saw cut, the machine cuts this in on time.
  • The gantry will park at the end of the program.
  • We can now lable the parts and unload the machine.

Spindle power

25 KW (S6) / 39.5 KW (S6)

34 Hp / 53.67 Hp

Maximum speed

22.000 rpm / 24.000 rpm

22.000 rpm / 24.000 rpm

Tool holder type

HSK-A63

HSK-A63

CNC rotation of the spindle (A-axis)

300 °/sec

300 °/sec

CNC rotation of the fork (C-axis)

300 °/sec

300 °/sec


CNC lineair tool magazine

  • hacodsc2087-8-3.jpg
  • hacodsc2253-7-3.jpg

Number of places

36

36

Maximum tool length

220 mm

8.66 "

Maximum tool diameter

700 mm

27.56 "

Adaption angular tools

standard

standard


Working area and safety precautions

All models are standard delivered with safety fences on the left, right and back side of the machine.The front side is protected with a CE certified led safety curtain to protect the working area. As an option all our models can be equipped as 2 working zones with CE safety scanner. The great advantage of scanners is that there are no barriers in the middle of the machine, which makes loading and unloading a lot easier when switching from 2 zones to 1 large working area.


Videos

  • Machining a curved train door part

  • Machining a curved train door part

  • Machining a curved train door part

  • Machining a curved train door part

  • Machining train door part

  • Machining train wing part

  • Machining train door part

  • Machining train wing part

  • Multi-Flex Nesting

  • Machining industrial profile

  • Multi-Flex Nesting

  • Machining industrial profile

  • Multi-Flex

  • Vacuum system

  • Multi-Flex

  • Vacuum system

Événements