In this bending machine (Euromaster ERM) the Y1 and Y2 axes operate as an independent double acting hydraulic system. Both axes share the same oil supply but the flow to the valves as well as true position(s) of the ram are entirely and separately controlled by computer command.
Fast and accurate
The CNC reads the ram position from independent linear encoders while monitoring and adjusting the proportional valves, producing a double-closed loop system. By using this principle as well as the integration of the latest technologies, we have succeeded in developing a user-friendly, service-friendly, fast and accurate press brake system.
Accuracy is further ensured by mounting the linear encoders on a C-frame connected to the bed, rather than directly on the side frames, so that deflection of the side frame and loads do not affect positioning. Accuracy is guaranteed up to 0.01 mm.
Working lengths up to 20 m with the Euromaster ERM
The Synchro system is such that it easily allows the coupling of two or more machines to obtain working lengths up to 20 m. In this configuration, machines can work independently as 2 separate machines with different applications or in tandem mode as one machine with double capacity and double bending length.
Hacobend 3D: the fastest bending software you'll ever see
Hacobend 3D is an extensive production preparation package that has been developed for the preparation and processing of 3D products for press brakes. Click here know more about the fastest bending software you'll ever see!
Step 1: Import product drawing
First import the product drawing (DXF wireframe 3D, DXF with thickness 3D, DXF 2D, IGES, …) to let Robosoft define your material properties.
Step 2: The most ideal tool setup
Then the software will propose you the most ideal tool setup, still leaving the opportunity to make manual adjustments.
Step 3: The optimal bending sequence
Robosoft will search in a fully automatic way the optimal bending sequence of your product (some minutes or even seconds for simple products).
Step 4: Immediate production
After finding the optimal bending sequence, the robot program is ready to be simulated and approved for immediate production.
Import the product drawing from different formats: DXF wireframe 3D, DXF with thickness 3D, DXF 2D, IGES, …
This module can be activated when the bending system is equipped with a robotic arm. This robot then manipulates the products between the bending cycles, just like an operator would.
The creation of the robot program is based on the product bending sequence, and the resulting program controls the robot as well as the press brake. This way the generated program can immediately be executed by the robot cell, without additional calibration or teaching.
The "Cell builder" module of the simulation can be used to create the most suitable setup for the robot cell in a virtual world: